– Mister Mojo, here. Introducing you to our
new GKI Bluetooth meter, now available in Europe. The meter comes in two forms. One that will measure your glucose in milligrams per deciliter, and another one that
will measure your glucose in millimoles. This is specific to your country. And when you go to order on the website, you’ll be shown the meter that you should have in your country. Let’s open it up and
see how the setup goes, because it’s the same
for both of those types. Inside, you’re going to
find your meter in its case. You’ll find a lancet device, right here. And, you will also find
all your user manuals, and we’re going to go through
those a little bit later on how to use it. I’m going to put the lancet
device to the side, for right now. Let’s go through the setup. So, open it up, here we go. And, inside you will
find you have your meter. And, there’s a protective
film on the top there, we can take that off, and you can see it, all its glory. It’s wonderful. So, on the back, if we turn it over, you’ll see a little pull tab. Inside, the battery’s already installed. You just pull that out, like that, and it will light on up, and it will beep. And now you need to try
and start to set it up, which is very simple. Right now, it’s saying
that it wants to have the time in the twelve hour clock. But, if I do the arrow
button up on the top here, on the side, I can change
it between 24 hour, or 12 hour. I happen to like 12 hour. And, this bottom button here, I double tap it to set it. One, two, there we go. Next, it’s going to
ask me what year is it? It’s 2019. Yeah, double tap. Then, we’re going to ask what month it is. It’s the month of July. Great, double tap. And, that today is the 30th. So, if I want to go up
or down on the date, I just go up or I come down here and I can adjust through
to the date like that. Double tap to set it. Now the next thing it’s
going to ask is the time. So we’ve got it in the 12 hour clock, so you can, want to say that
it’s roughly about four o’clock, so let’s move that up by
one, great, four o’clock. Double tap. And now we come to the minutes. 35 minutes past, double
tap, and we are good to go. Now it’s going to ask you,
do you want it to beep? I like my meter to beep, so
I’m going to say yes to that. The next thing it’s going to ask, shall we set the alarms? You have five alarms on this,
I’m not going to go through each of the settings of them right now, we can do that on the later one. So I’m just going to say Alarm One is off, Alarm Two is off, Alarm Three is off, Alarm Four is off, and Alarm Five is off. Now, the next thing we come to is pre- and post-prandial tagging. That’s before and after you eat. And we can say yes, we’d like to tag that. The next bit is being designed for Type One and Type Two diabetics. It’s a hypoglycemia alarm, and we’re going to say
yes, we do want that. So we’re going to say
yes to the hypoglycemia. Now it’s going to ask at what level, what milligrams per
deciliter or millimoles, do you want the alarm to go. And I’m going to go and move
this up to about 75 here, like that, that’ll work for me. 70 is good for most people. Double tap to say yes. Then it’s going to ask you
if you want a ketone alarm. Now a ketone alarm is to
remind you that if you’ve got very high ketones, and high glucose, it’ll beep to remind you
to make sure that you are checking your glucose at that time. Because when you have high glucose in the presence of high ketones, this is a concern for ketoacidosis, but that only happens with Type Ones, and it’s a very rare kind of thing, but so, we’re just going
to say yes to that. Next thing we’re coming
on into, is basically, we have finished all of the setup that is required. Double tap, and it will switch off, and now we’re done. And we’re ready to test.




Leave a Reply

Your email address will not be published. Required fields are marked *